OpenVistA-CIS client package

From VistApedia
Revision as of 17:30, 28 February 2010 by Perspectoff (talk | contribs) (Connect OpenVistA-CIS to a server through an SSH tunnel)
Jump to: navigation, search

The Medsphere OpenVista-CIS package is a modification of CPRS which has image viewing and other commercial ehancements added.

It uses the .NET framework in Windows or the MONO framework in Linux. There are versions for both platforms. (Mac users may be able to adapt the Linux version.) OpenVistA-CIS was developed on the Gtk platform (a widely-used Linux development platform).

Installation on Windows

  • If using an Astronaut OpenVistA server package, it is easiest to start OpenVistA-CIS using the Astronaut shortcut.

Installation on Linux

(These instructions are oriented towards Ubuntu/Kubuntu users). See this page for more information about dependencies.

  • Install the Mono platform and other required dependencies in Ubuntu 9.10 (Karmic):
  • mono-runtime
  • libmono-corlib2.0-cil
  • libgtk2.0-cil
  • libglade2.0-cil
  • libmono-cairo2.0-cil
  • libmono-winforms2.0-cil
  • libmono-system-runtime2.0-cil

You can install all of the dependencies at once using the following command:

sudo apt-get install mono-runtime libmono-corlib2.0-cil libgtk2.0-cil libglade2.0-cil libmono-cairo2.0-cil libmono-winforms2.0-cil libmono-system-runtime2.0-cil
  • Create directories and download the binaries into them:
mkdir ~/openvistacisclient
cd ~/openvistacisclient
wget http://sourceforge.net/projects/openvista/files/OpenVista%20CIS/1.0%20RC2/openvistacis-0.9.96-client.zip/download
mkdir ~/openvistacisvitals
cd ~/openvistacisvitals
wget http://sourceforge.net/projects/openvista/files/OpenVista%20CIS/1.0%20RC2/openvistacis-0.9.96-vitals.zip/download
  • Unzip the binaries into their respective folders:
cd ~/openvistacisclient
unzip openvistacis-0.9.96-client.zip
cd ~/openvistacisvitals
unzip openvistacis-0.9.96-vitals.zip
  • Run (or create a shortcut to run) the OpenVistA-CIS client:
cd ~/openvistacisclient
mono OpenVistaCIS.exe
and the OpenVistA-CIS Vitals module:
cd ~/openvistacisvitals
mono OpenVistaVitals.exe

Note: If running from a menu item shortcut, make sure you set the directory as the workpath:

Menu Editor -> New item
-> General -> Name: OpenVistA-CIS Client -> Command: mono OpenVistaCIS.exe
-> Advanced -> Work path: ~/openvistacisclient

Connect OpenVistA-CIS Client to a server

  • Use your Access Code / Verify Code (default at installation is sys.admin / vista!123 for Astronaut systems) as the LoginID / Password.
  • If you happen to have installed the OpenVistA-CIS Client(s) on the same computer as Astronaut OpenVistA server, and port 9260 is open (in the firewall) on that computer, you can generally connect directly:
OpenVistA-CIS Client -> Server: localhost -> Port: 9260

Connect OpenVistA-CIS to a server through an SSH tunnel

ssh -l client9260 -pw not#1sostrong -L 9260:127.0.0.1:9260 remote.computer.xyz -p 22

Installation on Mac